Risultati ricerca pubblicazioni

Calibration of an Advanced Constitutive Model Through Direct Shear Test Results

pubblicato su: International Conference of the International Association for Computer Methods and Advances in Geomechanics IACMAG 2021: Challenges and Innovations in Geomechanics - 2021
Rotisciani G. M., Natu E., de Lillis A., Sebastiani D., Miliziano S

Effects of Thickeners Polymers Used in Tunnelling on the Physical and Mechanical Properties of Fine-Grained Soils

pubblicato su: Lecture Notes in Civil Engineering - 2020
Sebastiani D., de Lillis A., Di Giulio A., Miliziano S.

Time evolution of the height of dredged mud in a containment facility: a comparison between monitoring data and numerical predictions

pubblicato su: Lecture Notes in Civil Engineering - 2020
de Lillis A., Rotisciani G. M., Miliziano S.

Artificial intelligence to predict maximum surface settlements induced by mechanized tunnelling

pubblicato su: Lecture Notes in Civil Engineering - 2020
Ramezanshirazi M., Sebastiani D., Miliziano S.

Numerical investigation of the behaviour of hydraulically dredged fine-grained soils during and after filling of the containment facility of the port of Gaeta

pubblicato su: GEOTEXTILES AND GEOMEMBRANES - 2020
de Lillis A., Rotisciani G. M., Miliziano S.

Predicted and observed settlements induced by the mechanized tunnel excavation of metro line C near S. Giovanni station in Rome

pubblicato su: TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY - 2019
Miliziano Salvatore, de Lillis Armando

Grain morphology and strength-dilatancy of sands

pubblicato su: GÉOTECHNIQUE LETTERS - 2019
Guida G., Sebastiani D., Casini F., Miliziano§ S.

Lining stresses in a TBM-driven tunnel: A comparison between numerical results and monitoring data

pubblicato su: Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art- Proceedings of the WTC 2019 ITA-AITES World Tunnel Congress - 2019
De Gori V., De Lillis A., Miliziano S.

Numerical study of the mechanical behavior of fine- grained dredged sediments

pubblicato su: Proceedings of the XVII ECSMGE 2019. Geotechnical Engineering foundation of the future - 2019
de Lillis A., Rotisciani G. M., Miliziano S.

The management of the soil conditioning process for the excavation of the Rome Metro C line

pubblicato su: Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art- Proceedings of the WTC 2019 ITA-AITES World Tunnel Congress - 2019
Pirone M., Carriero F., Sorge R., Sebastiani D., Miliziano S., Foti V.

Water tightness by final lining with programmed waterproofing construction joints in conventional tunneling

pubblicato su: Tunnels and Underground Cities: Engineering and Innovation meet Archaeology, Architecture and Art- Proceedings of the WTC 2019 ITA-AITES World Tunnel Congress - 2019
Marchioni A., Miliziano S.

Impermeabilizzazione di gallerie in tradizionale utilizzando sistemi di giunti di fessurazione programmata

pubblicato su: IX Incontro Annuale dei Giovani Ingegneri Geotecnici - 2019
Marchioni Andrea, Miliziano Salvatore

Design of an underground railway station beneath a historic building in Rome and class A predictions of the induced effects

pubblicato su: GALLERIE E GRANDI OPERE SOTTERRANEE - 2019
Miliziano Salvatore, Caponi Simone, Carlaccini David, De Lillis Armando

Crack formation and damage evolution during consolidation in TBM driven tunnel linings in fine-grained soils

pubblicato su: Proceedings of the WTC 2018 - 2018
De Gori Vincenzo, Miliziano Salvatore, DE LILLIS Armando

Modellazione numerica dei processi di consolidazione dei fanghi di dragaggio nella vasca di colmata di Gaeta

pubblicato su: Atti Incontro Annuale dei Ricercatori di Geotecnica 2018 - 2018
DE LILLIS Armando, Rotisciani Giada M., Miliziano Salvatore

Numerical modelling strategy to accurately assess lining stresses in mechanized tunneling

pubblicato su: Proceedings of the 9th European Conference on Numerical Methods in Geotechnical Engineering - 2018
DE LILLIS Armando, De Gori Vincenzo, Miliziano Salvatore

Effect of Chemicals in Clogging Risk Reduction for TBM‐EPB Application

pubblicato su: Proceedings of the World Tunnel Congress 2018 - The Role of Underground Space in Building Future Sustainable Cities - 2018
DI GIULIO Anita, Sebastiani Diego, Miliziano Salvatore

Effectiveness of Foam Injection during Mechanized Excavation of Tunnels with TBM-EPB Technology

pubblicato su: Proceedings of the World Tunnel Congress 2018 - The Role of Underground Space in Building Future Sustainable Cities - 2018
Sebastiani Diego, Miliziano Salvatore, Zanetto Giuseppe, Ginanneschi Roberto

An integrated topology optimization framework for three-dimensional domains using shell elements

pubblicato su: THE STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS - 2021
Angelucci G., Spence S. M. J., Mollaioli F.

Quantification of energy-related parameters for near-fault pulse-like seismic ground motions

pubblicato su: APPLIED SCIENCES - 2020
Alshawa O., Angelucci G., Mollaioli F., Quaranta G.

A new modular structural system for tall buildings based on tetrahedral configuration

pubblicato su: BUILDINGS - 2020
Angelucci G., Mollaioli F., Tardocchi R.

Evaluation of optimal lateral resisting systems for tall buildings subject to horizontal loads

pubblicato su: PROCEDIA MANUFACTURING - 2020
Angelucci G., Mollaioli F., Alshawa O.

Analysis of near-fault pulse-like seismic signals through Variational Mode Decomposition technique

pubblicato su: ENGINEERING STRUCTURES - 2019
Quaranta Giuseppe, Mollaioli Fabrizio

Response of RC frames under pulse-like seismic ground motion: preliminary results

pubblicato su: 1st Eurasian Conference on OpenSEES - 2019
Demartino Cristoforo, Quaranta Giuseppe, Mollaioli Fabrizio

A variational approach for energy-based analysis of near-fault pulse-like seismic records

pubblicato su: 7th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering - Proceedings vol. II - 2019
Quaranta Giuseppe, Mollaioli Fabrizio

On the use of the equivalent linearization for bilinear oscillators under pulse-like ground motion

pubblicato su: ENGINEERING STRUCTURES - 2018
Quaranta Giuseppe, Mollaioli Fabrizio

Energy based design of a timber-steel multi-story building

pubblicato su: EARTHQUAKES AND STRUCTURES - 2018
Goertz C., Mollaioli F., Tesfamariam S.

Seismic response prediction of reinforced concrete buildings through nonlinear combinations of intensity measures

pubblicato su: BULLETIN OF EARTHQUAKE ENGINEERING - 2018
Fiore Alessandra, Mollaioli Fabrizio, Quaranta Giuseppe, Marano Giuseppe C.

Voronoi-Like grid systems for tall buildings

pubblicato su: FRONTIERS IN BUILT ENVIRONMENT - 2018
Angelucci Giulia, Mollaioli Fabrizio

Dissipation in sheathing-to-framing connections of light-frame timber shear walls under seismic loads

pubblicato su: ENGINEERING STRUCTURES - 2020
Di Gangi Giorgia, Demartino Cristoforo, Quaranta Giuseppe, Monti Giorgio

A simplified analytical procedure for seismic analysis of timber light-frame sheer walls

pubblicato su: NED UNIVERSITY JOURNAL OF ENGINEERING RESEARCH - 2020
Di Gangi Giorgia, Monti Giorgio, Quaranta Giuseppe, Vailati Marco, Demartino Cristoforo

Seismic performance of timber light-frame shear walls

pubblicato su: Life-Cycle Civil Engineering: Innovation, Theory and Practice - 2020
Di Gangi Giorgia, Quaranta Giuseppe, Monti Giorgio, Demartino Cristoforo

Modellazione parametrica di pareti a telaio leggero in legno mediante OpenSEES

pubblicato su: Atti del XVIII Convegno ANIDIS L'ingegneria Sismica in Italia : Ascoli Piceno, 15-19 settembre 2019 - 2019
DI GANGI Giorgia, Demartino Cristoforo, Quaranta Giuseppe, Monti Giorgio

Parametric modeling of timber light-frame shear walls using OpenSEES: preliminary results

pubblicato su: PROCEEDINGS OF THE 1ST EURASIAN CONFERENCE ON OPENSEES:OPENSEES DAYS EURASIA - 2019
DI GANGI Giorgia, Demartino Cristoforo, Quaranta Giuseppe, Monti Giorgio

Precast industrial buildings in Southern Europe: Loss of support at frictional beam-to-column connections under seismic actions

pubblicato su: BULLETIN OF EARTHQUAKE ENGINEERING - 2018
Demartino Cristoforo, Vanzi Ivo, Monti Giorgio, Sulpizio Concetta

Earthquake-safe and energy-efficient infill panels for modern buildings

pubblicato su: Geotechnical, Geological and Earthquake Engineering - 2018
Vailati Marco, Monti Giorgio, Di Gangi Giorgia

A permanent wireless dynamic monitoring system for the Colosseum in Rome

pubblicato su: JOURNAL OF STRUCTURAL INTEGRITY AND MAINTENANCE - 2018
Monti Giorgio, Fumagalli Fabio, Quaranta Giuseppe, Sgroi Marco, Tommasi Marcello

Leaning tower of Pisa: recent studies on dynamic response and soil-structure interaction

pubblicato su: Proceedings of the 16th European Conference on Earthquake Engineering (16ECEE) - 2018
Fiorentino Gabriele, Lavorato Davide, Quaranta Giuseppe, Pagliaroli Alessandro, Carlucci Giorgia, Mylonakis George, Squeglia Nunziante, Briseghella Bruno, Monti Giorgio, Nuti Camillo

Mechanics of active gel spheres under bulk contraction

pubblicato su: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES - 2021
Curatolo M., Nardinocchi P., Teresi L.

Shape-shifting of polymer beams and shells due to oil extraction

pubblicato su: EXTREME MECHANICS LETTERS - 2020
Battista D., Luchnikov V., Nardinocchi P.

Local and global energies for shape analysis in medical imaging

pubblicato su: INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN BIOMEDICAL ENGINEERING - 2020
Varano Valerio, Piras Paolo, Gabriele Stefano, Teresi Luciano, Nardinocchi Paola, Dryden Ian L., Torromeo Concetta, Schiariti Michele, Puddu Paolo E.

Mechanics and diffusion in gels with solvent-filled cavities

pubblicato su: MECHANICS OF SOFT MATERIALS - 2020
Curatolo Michele, Nardinocchi Paola, Teresi Luciano

Improving performance values of 3D speckle tracking in arterial hypertension and paroxysmal atrial fibrillation by using novel strain parameters

pubblicato su: SCIENTIFIC REPORTS - 2019
Esposito G., Piras P., Evangelista A., Nuzzi V., Nardinocchi P., Pannarale G., Torromeo C., Puddu P. E.

Diffusion-driven stress relaxation of gels under incremental planar extensions

pubblicato su: MECHANICS OF MATERIALS - 2019
Vita Raffaella De, Nardinocchi Paola, Teresi Luciano

Swelling effects on localized adhesion of an elastic ribbon

pubblicato su: PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON. SERIES A - 2019
Curatolo Michele, Nardinocchi P., Teresi L., Holmes D. P.

Swelling-induced eversion and flattening in naturally curved gel beams

pubblicato su: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES - 2019
Battista Daniele, Curatolo Michele, Nardinocchi Paola

Enforcing shaping of thin gel sheets by anisotropic swelling

pubblicato su: MECHANICS OF MATERIALS - 2019
Battista Daniele, Curatolo M., Nardinocchi P.

Swelling and shrinking in prestressed polymer gels: an incremental stress–diffusion analysis

pubblicato su: PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON. SERIES A - 2019
Rossi Marco, Nardinocchi Paola, Wallmersperger Thomas

Non-invasive prediction of genotype positive–phenotype negative in hypertrophic cardiomyopathy by 3D modern shape analysis

pubblicato su: EXPERIMENTAL PHYSIOLOGY - 2019
Piras P., Torromeo C., Evangelista A., Esposito G., Nardinocchi P., Teresi L., Madeo A., Re F., Chialastri C., Schiariti M., Varano V., Puddu P. E.

Dynamics of active swelling in contractile polymer gels

pubblicato su: JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS - 2019
Curatolo Michele, Nardinocchi Paola, Teresi Luciano

© Università degli Studi di Roma "La Sapienza" - Piazzale Aldo Moro 5, 00185 Roma