Ricerc@Sapienza

Being the Vacuum Vessel Pressure Suppression System (VVPSS) one of the most important passive safety systems to be foreseen in DEMO plant, design and integration challenges have to be faced to ensure that best performance within safety requirements are always achieved. In this framework, parametric safety analyses have been performed to support VVPSS design activities; in particular to determine the minimum flow area required by the suppression system pipework to limit the vacuum vessel pressure below the limit imposed as a requirement by design.

Transient analyses in a water-cooled fusion DEMO (Demonstration Power Plant) reactor have been performed to support the WCLL (Water-Cooled Lithium Lead) breeding blanket design. In this framework, the Design Basis Accident (DBA) analysis of an in-box LOCA has been carried out. The WCLL breeding blanket concept relies on Lithium Lead (LiPb) as breeder, neutron multiplier and tritium carrier, which is cooled by water at 15.5 MPa with an inlet temperature of 295 °C and an outlet temperature of 328 °C.

In this early development phase of the DEMO design the uncertainty affecting many operational and design parameters can modify main outcomes of accident scenario aiming at studying the critical conditions for the vacuum vessel and the contiguous containment volumes. The aim of this paper is to perform a preliminary sensitivity analysis of an accident progression predicted by MELCOR code considering selected parameters as a figure of merit to predict possible code outcomes.

In the framework of severe accident research activity developed by ENEA, a MELCOR nodalization of a generic Pressurized Water Reactor of 900 MWe has been developed. The aim of this paper is to present the analysis of MELCOR code calculations concerning two independent unmitigated large break loss of coolant accident transients, occurring in the cited type of reactor.