Titolo |
Pubblicato in |
Anno |
Effect of ground-motion sequences on a unreinforced masonry wall restrained by an elasto-plastic tie-rod |
PROCEDIA STRUCTURAL INTEGRITY |
2023 |
On the application of the yield-line method to masonry infills subjected to combined in-plane and out-of-plane loads |
STRUCTURES |
2021 |
Assessment of out-of-plane strength of masonry infills according to EC6 |
COMPDYN 2021, Proceedings of the 8th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering |
2021 |
Out-of-plane capacity equations for masonry infill walls accounting for openings and boundary conditions |
ENGINEERING STRUCTURES |
2020 |
Seismic demand on a unreinforced masonry wall restrained by elasto-plastic tie-rods under earthquake sequences |
INTERNATIONAL JOURNAL OF ARCHITECTURAL HERITAGE |
2019 |
In-plane response of masonry infill walls: Comprehensive experimentally-based equivalent strut model for deterministic and probabilistic analysis |
ENGINEERING STRUCTURES |
2018 |
Failure of masonry infill walls under out-of-plane loads |
Proceedings of the 10th International Masonry Conference |
2018 |
Seismic demand of the 2016–2017 Central Italy earthquakes |
BULLETIN OF EARTHQUAKE ENGINEERING |
2018 |
Seismic Demand on Historical Constructions During the 2016–2017 Central Italy Earthquake Sequence |
RILEM Bookseries |
2018 |
A new method to predict the critical incidence angle for buildings under near-fault motions |
STRUCTURAL ENGINEERING AND MECHANICS |
2018 |
Numerical evaluation of masonry infill walls behaviour under out-of-plane loads |
16th European Conference on Earthquake Engineering |
2018 |
Modelling of masonry infilled RC frames subjected to cyclic loads. State of the art review and modelling with OpenSees |
ENGINEERING STRUCTURES |
2017 |
Comparative assessment of strut models for the modelling of in-plane seismic response of infill walls |
6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering |
2017 |
Reliability of analytical models for the prediction of out-of-plane capacity of masonry infills |
STRUCTURAL ENGINEERING AND MECHANICS |
2017 |
Finite-discrete element modelling of masonry infill walls subjected to out-of-plane loads |
European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2016 |
2016 |
Predicting models for the evaluation of out-of-plane ultimate load carrying capacity of masonry infill walls |
Earthquake Resistant Engineering Structures X |
2015 |
Authors' reply to discussion by G.P. Mavroeidis of "Displacement Damping Modification Factors for pulse-like and ordinary records" |
ENGINEERING STRUCTURES |
2015 |
Assessment of the out-of-plane resistance of masonry infill walls |
Proceedings of The Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing |
2015 |
Influence of masonry infill modelling on the seismic response of reinforced concrete frames |
Proceedings of The Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing |
2015 |
Sicurezza in zona sismica. L’influenza degli elementi non strutturali |
Architettura e Paesaggio. Le trame connettive del progetto |
2015 |